My issue is related to the rak833 with eval board instead of rak831 with a rpi. I have configure my rak831 early and everything works fine.
But with the rak 833 eval board I have some problem. When I am starting the packet forwarder by hand it is crash. And After several attempts it will work (see log section). I am not able to have more log from the packet forwarder.
Could yo u also send me the jumper information of the eval board ?
INFO: downstream keep-alive interval is configured to 10 seconds
INFO: statistics display interval is configured to 30 seconds
INFO: upstream PUSH_DATA time-out is configured to 100 ms
INFO: packets received with a valid CRC will be forwarded
INFO: packets received with a CRC error will NOT be forwarded
INFO: packets received with no CRC will NOT be forwarded
ERROR: [main] failed to start the concentrator
root@OpenWrt:/usr/bin/packet_forwarder# vi global_conf.json
*** Beacon Packet Forwarder for Lora Gateway ***
*** Lora concentrator HAL library version info ***
INFO: Little endian host
INFO: found global configuration file global_conf.json, parsing it
INFO: global_conf.json does contain a JSON object named SX1301_conf, parsing SX1301 parameters
INFO: lorawan_public 1, clksrc 1
INFO: LBT is disabled
INFO: antenna_gain 0 dBi
INFO: Configuring TX LUT with 16 indexes
INFO: radio 0 enabled (type SX1257), center frequency 867500000, RSSI offset -166.000000, tx enabled 1, tx_notch_freq 129000
INFO: radio 1 enabled (type SX1257), center frequency 868500000, RSSI offset -166.000000, tx enabled 0, tx_notch_freq 0