Hey Edi that worked fine.
I would like to make one change that would improve it.
As well at the GPS data being sent I would like the SNR data. Currently it is set to appPort=2.
Can I send GPS and SNR data?
Well fired it up and it seems it is sending GPS.
018808078EFFB3DE004074 is one payload..
I honestly thought the GPS data would be in the metadata unless its embedded in the time.
Edi where do i set the payload format to Cayenne LPP. There is nothing in your documentation that says that is needed. Cayenne setup is the only time Cayenne is mentioned.
My GPS antenna is outside the window with a clear view of the sky. I picked up GPS with the tracking firmware that came installed as default. Now with the firmware you tell us to put on from github GPS is no longer working.
I will see if i can see a payload setting in the code somewhere
I have managed to change the Dev_EUI along with App_EUI & App_Key. These now match my TTN settings and the application / device now connect to my RAK831 gateway.
In the data received I can see the SNR & SF used. However, there is no GPS data. The tracker has the GPS antenna connected.
Do I need to enable GPS in the code somewhere? I really need the GPS data.
Is there a different firmware than the one on github to enable GPS?
Looks like your connection to RAK Support Center was lost, please wait while we try to reconnect.