Wiscam Intelligent fan



  • 1.Basic principle
    Wiscam works in AP or STA mode; in AP mode, the upper computer connects the hot spots of Wiscam; in STA mode, the Wiscam and the upper secret are connected to the same router. Wiscam through the serial port and Arduino serial connection, the upper computer software to send control instructions to Wiscam, Wiscam through the transmission through the serial port to data to Arduino, Arduino through PWM control DC motor speed.
    0_1496713546589_upload-6674b01e-5095-4025-bdd9-a7fbddcd7289
    2.Upper computer software (source code)
    (1) Control interface
    0_1496714345860_upload-429dbdae-b948-4d07-96cf-581fc149b602
    (i) after downloading the application of the top machine, run.
    (ii) the advanced line scan, then the IP address of the wiscam will be found, and the hook will be followed by the list.
    (iii) choose the speed you want.
    (2)Download address
    https://github.com/RAKWireless/Wiscam-Intelligent-fan.git
    3.Engineering documentation (including lower computer of Arduino code)
    0_1497690575758_Wiscam Intelligent fan.docx



Looks like your connection to RAK Support Center was lost, please wait while we try to reconnect.