RAK8211 NB



  • I have a RAK8211-NB and J-LINK emulator both from RAK.
    I tried to follow the guides to use Arduino IDE and flash the NORDIC52832 both with J-LINK and the UART to serial adapter provided, without success.
    The schematics provided seems different from what I can see in the device I own (eg. pinout on the device P1-P4 seems to be inverted).
    Can you provide detail information on how to proceed to flash the device and also instructions about the wiring with J-LINK and the breakout USB-UART board? What about the jumpers you provided in the package?
    Are they necessary to flash the device?
    I would like to start with a simple example and then I would like to try to send AT commands to the BC95-G.
    Can anyone help?



  • Yes, these jumpers are quite intriguing. I would also like to know if they should be used for something.



  • Hello,

    Regarding the J-link wiring, just connnect VDD, SWDIO, SWCLK, AND GND to the respecive pins on your adapter board (eg. in my board I have a connector named JP7 which has VDREF, SWDIO, SWCLK and GND pins).

    I have also unsuccessfullly tried to flash softdevice using Arduino IDE. RAK's documentation is not very in depth...
    What I was able to do is to program the board using Segger Studio (the recommended IDE from Nordic Semi). Just follow the guide in Nordic's site [https://infocenter.nordicsemi.com/index.jsp?topic=%2Fcom.nordic.infocenter.sdk52.v0.9.1%2Fgroup__nrf__drv__spi__master.html](link url) and let me know if you have any doubts.

    Also, you can use nrfgo studio to flash softdevice and program into the chip


Log in to reply
 

Looks like your connection to RAK Support Center was lost, please wait while we try to reconnect.