How to switch Rak566 from Client mode to SoftAP mode (standalone) ?



  • Re: RAK566: TX-Client and/or RX-softAP mode ?

    The couple of Rak566 + Rak554 are just arrived!

    We see the softAP created by the Rak554 anc we can connect to it: Ok.

    Sadly, we cannot see any video stream transmitted from the source connected to Rak566.

    The question is: How could we enable the SoftAP mode in Rak566 ?
    We cannot use any webpage, because we are connecting to Rak554, not Rak566!

    You said there is a button for switching the Rak566 Mode from Client Mode to SoftAP Mode... which one is it ?

    So we can try to see if the Rak566 (alone) is capable of transmitting the video stream from the HDMI source...

    Thanks.



  • hi , sir
    when you can not connect rak566 to the receiver rak554 , what 's the status of rak566 blue led ? blink or turn on or off?



  • The blue led is on, stable (not blinking). On both rak566 and rak554
    (it will blink just during the first 20 sec. after powering them up)

    I can connect to the rak554 (to its default address: 192.168.100.1).
    but after the login (admin/admin) i get a wrong page like this:

    Content-type: text/html

    <html>
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
    <script type="text/javascript">
    <!--
    function createCookie(name, value, days) {
    if (days) {
    var date = new Date();
    date.setTime(date.getTime()+(days2460601000));
    var expires = "; expires="+date.toGMTString();
    }
    else var expires = "";
    document.cookie = name+"="+value+expires+"; path=/";
    }
    createCookie("NuvotonAuthorized", "admin", 1);
    createCookie("verified_url", "true", 1);
    createCookie("skyeye_host", "http://" + window.location.host, 1);
    window.location.href = "menu_dual_stream.html";
    -->
    </script>
    </head>
    <body>
    </body>
    </html>

    Opening, by hand, the url: http://192.168.100.1/SkyEye/menu_dual_stream.html the page will display, but always with a "No available MJPG stream!" error. No matter how I play with the menu:
    [Merged A/V Stream]
    [Separate A/V Stream]
    [RTSP Viewer]
    [Network Config]
    [Alarm Config]
    [Server Config]
    [Firmware Update]
    [About SkyEye]

    But, anyway, now i understood i can connect to rak566 (the transmitter) using the address: 192.168.100.101

    So, here i can configure the rak566 using
    http://192.168.100.101/wifi.php

    So, if I'm right, I can change WIFI工作模式
    from: STA模式
    to: AP模式
    In order to let the rak566 work alone without connecting to rak554.
    Is that ok ?

    Thanks.

    By the way, which is the username/password to connecto to rak566 via telnet ?


Log in to reply
 

Looks like your connection to RAK Support Center was lost, please wait while we try to reconnect.