I have recently purchased two RACK8211-NB iTracker with BC95 NB
I cannot find the schematics documentation in the documentation web:
Could you please upload the schematics of the board so we can download the document?
I have followed your instructions to startup with arduino and RACK8211, but there is no output on the serial port for the ble-peripheral led-switch example. Please confirm that the serial port pin numbers that need to be configured in the variant.h file are 15 and 16 as indicated in the instructions.
Please indicate the serial port pins for the GPS and the BC95 chips and the required serial port parameters and seed. Do you have any example of communication with the GPS and BC95 modules?
Is this the schematic diagram you need? Please select the download you want.
Currently, there are few documents of RAK8211, and we will add some basic usage documents later.
There are projects on our official github.
Thanks for your answer.
The schematics you have linked are for other versions of iTracker, the ones that mount the M35 module and the BG96 module. These are not the schematics I asked for.
The schematics I need are the schematics of the iTracker that mounts the Quectel BC95-G module, which is different from the other two.
Could you please send the schematics for the RAK8211-NB-iTracker-NB-IoT-Tracker-Module-BC95-Support-Global-band-NBIoT-BLE-GPS-5-Sensors module?
I have found in GitHub the following projects related to the iTracker:
iTracker_firmware_keil is the most up-to-date repository
In https://github.com/RAKWireless/iTracker_firmware_keil/blob/master/source/usr/inc/bsp_itracker.h I have found the pin definitions I was looking for.
@jprodriguez The BC95 and M35 are pin to pin compatible, so their schematics are the same.