Flylink HD plus's outputs only720p?



  • I get a flylink hd plus. My video outputs 1080p@60 with HDMI, but Flylink outputs only 720p and iOS also 720p. How to change the output to 1080p?



  • @Nabe i have the same problems. how did you decide it?



  • Refer to: http://support.rakwireless.com/topic/484/rak-566-567-work-output-only-in-720p-but-input-is-1080p

    I connected the RAK567 to the network (using 192.168.100.1/test.php, username test, password test) and changed the static IP.

    On the RTSP video stream you have then on the router (rtsp://192.168.1.89/cam1/h264), it is for sure a FullHD stream.

    NOTE: The video stream I got from the RAK567 is FullHD@60Hz (it is what my screen shows me) while in 192.168.100.1/test.php it shows "720p" and each time I switch it to 1080p, it switches back to 720p.

    Can you double check that your RAK566 is sending a FullHD stream?
    => Connect to the Flylink WiFi
    Connect to 192.168.100.100/test.php (test:test) and change Pipe0 settings. I am setting Pipe1 to the minimal (QVGA) as if I put both to maximal, I am losing frames.


Log in to reply
 

Looks like your connection to RAK Support Center was lost, please wait while we try to reconnect.