RAK811 / Network Objenious
Hi, the firmware version is 220.127.116.11. I try to download in 18.104.22.168 but I have not succeeded.
I used flash_loader_demo_v2.8.0 and RAK_LoRa_Upgrade_Tool_V1.0.
Do you have another tool to download the firmware in the module.
hi，what's you module name?
if you module is RAK811 , you must use the flash_loader_demo_v2.8.0 tool to update the firmware.
if you module is RAK811-N, you must use the RAK_LoRa_Upgrade_Tool_V1.0 to update the firmware.
hi, it's RAK811-N in EVB format. I used RAK_LoRa_Upgrade_Tool_V1.0 to update the firmware.
The connection with the board is ok but sending data don't start. After one hour, the progress bar don't increase.
Hi，You need the RAK811-N Firmware.
Hi, i have the same conclusion.
So where is the upgrade for RAK 811-N. In downloading your document, there is no update for the RAK811-N.
Is version 22.214.171.124 compatible with LoRaWan1.0.2 ?
Hi，Now the RAK811-N firmware is base on LoRaWAN1.0.1, LoRaWAN1.0.2 based firmware we are testing, is expected to be released soon on the official website by the end of this week.
Thanks for your reponse.
I'm waiting the update to test.
Hi, Firmware has been updated on the official website. You can download the test, have any questions, please go to the forum put forward. Thank you.
Hi, I have update the module and it's OK. The module is now join on Objenious network.
Thank-you for your prompt response.
Another question, I saw in your documentation, that you have developed a breakboard with the RAK-811 and a GPS and an accelerometer. I'm really interest by this module so where i can buy it.
Hi, you can buy in : https://www.aliexpress.com/store/product/RAK811-LoRa-Tracker-Board-MAX-7Q-GPS-Module-and-MEMS-Sensor-Wireless-Remote-Positioning-Solution-LoRaWAN/2805180_32844470946.html?spm=2114.120106126.96.36.199eca6241fwyged