how to pair with RAK566 and RAK5610/RAK554



  • 5 Make new Pair
    5.1 Transmitter(STA): RAK566.
    Step1 : Power on RAK566 waiting the board blink or lighting more than 10 seconds .
    Step2 : Power on RAK554(RX) and waiting for blue LED turn on . Toggle Receiver’s DIP switch PIN1 to Low-Level more than 1 second and then Toggle to High-Level .The blue LED will be quick flashing. The Receiver have run into WPS Pair mode .
    Step3 : Press the button in the red circle 3 seconds and leave . the blue LED will be quick flashing. The Receiver have run into WPS Pair mode . If not ,please try again .
    0_1501481920873_AVHD_05.png
    Step4 : Waiting for the Transmitter blue LED turn on more then 10 seconds. That means the configuration have completed .



Looks like your connection to RAK Support Center was lost, please wait while we try to reconnect.