How to connect transmitter and receiver togather in flylink HD and Flylink AV



  • 5 Make new Pair
    5.1 Transmitter(STA): RAK566.
    Step1 : Power on RAK566 waiting the board blink or lighting more than 10 seconds .
    Step2 : Power on RAK554(RX) and waiting for blue LED turn on . Toggle Receiver’s DIP switch PIN1 to Low-Level more than 1 second and then Toggle to High-Level .The blue LED will be quick flashing. The Receiver have run into WPS Pair mode .
    Step3 : Press the button in the red circle 3 seconds and leave . the blue LED will be quick flashing. The Receiver have run into WPS Pair mode . If not ,please try again .
    0_1501481920873_AVHD_05.png
    Step4 : Waiting for the Transmitter blue LED turn on more then 10 seconds. That means the configuration have completed .

    5.2 Transmitter(STA): RAK553.
    Step1 : Power on RAK553 waiting the board blink or lighting more than 10 seconds .
    Step2 : Power on RAK554(RX) and waiting for blue LED turn on . Toggle Receiver’s DIP switch PIN1 to Low-Level more than 1 second and then Toggle to High-Level .The blue LED will be quick flashing. The Receiver have run into WPS Pair mode .
    0_1501481934946_AVHD_02.png
    Step3 : Same operation with Step2 on the Receiver .
    Step4 : Waiting for the Transmitter blue LED turn on more then 10 seconds. That means the configuration have completed .
    6 Enclosure
    Android APP: https://www.pgyer.com/camsight
    IOS APP : Search in APPLE STORE with camsight sport and install.
    Document Center:
    www.rakwireless.com/en/download
    wiki.rakwireless.com/doku.php
    Support Center:
    supporten.rakwireless.com/
    Website:
    www.rakwireless.com
    APP SDK Source code(rakvideo):
    www.github.com/rakwireless



Looks like your connection to RAK Support Center was lost, please wait while we try to reconnect.